 |
Important features :
|
The CMP 3 pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The CMP 3 pyranometer is designed for continuous indoor and outdoor use.
The CMP 3 pyranometer (ISO Second Class) is intended for shortwave global solar radiation measurements in the spectral range from 300 to 2800 nm. The thermopile detector measures irradiance up to 2000 W/m² with response time <18 seconds and typical sensitivity 10 µV/W/m² that varies less than 5% from -10ºC to +40ºC
Operating temperature range is -40ºC to +80ºC and the stability is better than 1 % per year.
The CMP 3 pyranometer features a snap-on white sun shield, integrated leveling and a weatherproof connector which is supplied pre-wired with 10 m of signal cable for simple installation. An optional mounting rod and longer cable lengths are available. Two CMP 3s can easily be mounted back-to-back to make a low-cost albedometer.
The Pyranometer does not require any power, it supplies a low voltage of 0 to 20 mV in relation to the amount of incoming radiation. When a higher voltage level or a 4 to 20 mA signal is required, the AMPBOX is the perfect solution.
Specifications
| Spectral range (50% points) | 300 to 2800 nm |
| Sensitivity | 5 - 20 µV/W/m² |
| Response time | 18 s |
| Zero offset - thermal radiation (at 200 W/m²) |
< 15 W/m² |
| Zero offset - temperature change (5 K/h) |
< 5 W/m² |
| Directional response (up to 80° with 1000 W/m² beam) | < 20 W/m² |
| Temperature dependence of sensitivity (-10ºC to +40ºC) | < 5% |
| Operational temperature range | -40°C to +80°C |
| Field of view | 180° |
| Maximum solar irradiance | 2000 W/m² |
| Overall accuracy | ± 10% |
